Thursday, June 14, 2012

Designing a pillow...

Good Morning, Dynamos!

I've got a project to share today, but it's not exactly a pattern.  It's an idea for a pattern.  I shot pictures as I went along, thinking that I was going to write it up, but now that it's complete, I'm a little iffy on it.  So I thought, instead, I'd show you a little about my design process.

I saw a cute idea on Pinterest for a pillow that wrapped around a car seat belt, for kids on long car trips.  I thought, "Cute idea!  I should make one of those for Mims."  Alas, the link was for a company that was selling the actual finished pillows.  They were a little pricey for a whim, so I then thought, "Still, it's a cute idea.  I can figure out how to make one for Mims."

Meanwhile, I had just made an Ikea run and had brought home several "naked" pillow forms to crochet covers for.  My favorite were the ninety-nine cent stomach-sleeper pillows.  I had made some throw pillows last year out of them, so I knew I could sew and cut them to whatever size I wanted. Besides, if I screwed it up, I was only out a buck!

I thought I wanted my car pillow to be made up of two 4" pillow sides, so I measured out 8" columns which I sharpied onto my pillow.  I sewed along the marker lines, and then cut my pillows apart.  I was able to get three 8"x19" pillows out of one stomach-sleeper pillow.  Score! Then I sewed a seam down the center of the pillow, to crease it so that it would fold around the seat belt.

Then I used a piece of scrap fabric (9"x40") to make a pillowcase for my new pillow.  I sewed the fabric, right sides together, along both of the long cut ends. Then I turned it right side out and poked the corner out so that they were sharp.  I would have ironed the pillowcase, but I knew that it was going to be encased in crochet, and the day was too hot to bother.  Besides, I was making it for Mims, not a private client. So I slid my pillow into the case, tucked the open end inside around the pillow and sewed the case closed.

Next I got to crochet my cover.  It took an entire skein of Lion Brand Cotton 100% Cotton worsted weight yarn.  I used a size G hook. I made my piece 70 stitches long, and just went back and forth using hdc stitches until the skein was gone.  I was left with about 18" of yarn for a tail.

I sewed my covered custom-sized pillow onto my crocheted piece, leaving about an inch of crochet as an edge I could use later for installing the pillow into my car.  I wasn't sure at that point how I was going to do it, and I wanted plenty of room in case I decided velcro was the best way to go.  I also discovered at that point that 70 stitches was about 5 stitches too long for my pillow form.  So I folded the bottom edge over the pillow and stitched it down.  I then stitched the pillow down on the other side, catching the folded edge in that seam too.   That left me with a poufy pillow part and a long flat blanket-y piece to wrap around the seat belt.

I thought about buttons and velcro to close my car pillow, but ultimately, I was worried about choking (buttons) and about scratching little faces (velcro).  I needed to come up with something else.  Something soft, something easy, something removable since I wasn't sure how many people would be into sewing the pillow into their car permanently. I finally decided that weaving a doubled-over length of ribbon through both sides would be easy enough to remove if it got gross, but not easy for a little guy (or gal) to pull off in the middle of a car trip.  I tied a bow at the top because it looked cute that way.  For a little boy, I might tie a small knot at the base of the pillow instead.  I suppose it would depend on the kid...


Mims likes her new cover a lot.  She has always hated seat belts, ever since the one horrible incident where I pulled her belt out too quickly and she got a rope burn from it.  Would that be a belt burn?  Anyway, I still feel awful about it, and this in no way makes up for my accident, but it does make it so that she will allow the belt to be next to her neck, which is much safer than her holding it away from her body.

The pillow didn't fold around the belt like I had hoped.  I would make it even narrower next time, I think.  Maybe 6".  And I would save myself the crochet and only use 65 stitches for the length of the cover.  I love the ribbon closure.



Do you have an opinion?  Should I have waited until this idea was perfected before I shared it?  Or does this spark your own ideas on how to improve upon my design?  I would love to hear what you think.

xoxo

11 comments:

  1. Awesome seat-belt cover. And if there were an interest in it (I am pretty sure there is) it could have an embroidered face on it, sorta like a doll. That comes from seeing how Mims is holding it in the last picture. Thank you for sharing :)

    Merry Christmas and lots of hugs and joy to you and your family,

    Syl

    ReplyDelete
    Replies
    1. Hi Syl! Merry Christmas to you too!! Ooh, a snuggle dolly would be awesome, instead of a hard, scratchy-edged seatbelt. Hmm. I'm going to have to think about how to do that! Great idea!!!
      xo Jaime

      Delete
  2. What kind of pillows are good for me and my husband. We bought a pillow top 1 years ago that we can’t flip every few months and now have a dip in the middle of the pillow because we sleep hugging most of the night. The nights we don’t hug our neck hurt because of the dip pulling us to the middle. So I find guide on how to choose the best pillow to get a beauty sleep.

    ReplyDelete
  3. Selecting the right pillow will make a huge difference in helping you get a good night's rest.Thanks for sharing..stomach sleeper

    ReplyDelete
  4. Fantastic, I'm enjoyed read this post, Every time search this type of post. Really I enjoyed. This article is really very interesting and effective. I think its must be helpful for us. Thanks for sharing your informative.
    identification card

    ReplyDelete
  5. Changing the look or character of a room can be as simple as painting the dividers or adding enlivening accents to the room. Adding pillows to space is one approach to achieve this objective. Planner pillows are ordinarily produced using a few unique textures and are regularly decorated with extravagant twists and trims; Click Here

    ReplyDelete
  6. Pixels function admirably in photographic pictures, yet are an ungainly device to use over various gadgets. Webdesign

    ReplyDelete
  7. After going through your contents I realize that this is the best of my knowledge as it provide the best information and suggestions. This is very helpful and shareworthy. If you are looking for the best Pillow For Lower Back Pain then visit Eliterest. Keep sharing more.

    ReplyDelete
  8. Great! This is a interesting read. It's a very useful and informative information for me. Thanks for sharing this useful information cooling pillow

    ReplyDelete